Non classé
Descartes Innovation Forum: Transportation Management Is Moving From Execution to Intelligent Orchestration
Published
2 mois agoon
By
Transportation management is no longer just about routing, tendering, carrier selection, and freight optimization. Those capabilities still matter, but the category is being pulled into a broader operating model shaped by artificial intelligence, real-time visibility, automation, and the growing need to connect transportation decisions to inventory, warehouse operations, customer service, and financial outcomes.
That transition will be at the center of a transportation management executive panel I will be moderating at the upcoming Descartes Innovation Forum in Chicago. The session will bring together Doug Waggoner of Echo Global Logistics, Shawn McLeod of Axle Logistics, and Jake Whitt of Pet Supplies Plus for a 35- to 40-minute discussion, followed by audience questions. The goal is not to follow a rigid script, but to explore where transportation management is creating value today, where the friction remains, and how executives see the market evolving.
For years, TMS conversations focused on a familiar set of questions: How do we reduce freight spend? How do we optimize loads? How do we improve tender acceptance? How do we select the right carrier and route freight more efficiently? Those questions remain fundamental, but they now sit inside a much more dynamic operating environment.
A transportation team may be responding to a failed tender, a deteriorating ETA, an appointment change, detention risk, an unexpected capacity constraint, or a customer-service issue. At the same time, those transportation events may have consequences for downstream inventory, warehouse labor, order commitments, or customer satisfaction. The transportation decision is no longer isolated. It is one decision inside a network of connected operational decisions.
That is why the discussion around TMS is increasingly moving from execution toward orchestration.
A traditional transportation system helps an organization plan and execute freight. A more intelligent transportation environment begins to interpret what is happening across the network, identify which events matter, evaluate alternatives, and increasingly support portions of the response. The real value comes from shortening the cycle between signal, decision, and action.
Consider a shipment that is projected to miss an appointment window. A conventional system may alert the user. A more advanced environment can evaluate whether the delay creates inventory risk, determine whether another carrier or route is available, assess the service and cost implications of each alternative, and present an operator with a much narrower set of viable responses.
That is where AI begins to matter operationally.
The first wave of AI in transportation has focused largely on prediction, recommendations, document processing, natural-language interaction, and exception identification. The more consequential shift will be toward systems that can interpret an operational condition, determine an appropriate response, coordinate with other applications, and help execute portions of that response with limited human intervention.
For brokers and logistics service providers, that can mean identifying at-risk freight earlier, evaluating capacity alternatives more quickly, automating routine communications, and focusing human operators on the exceptions where judgment really matters. For shippers, it may mean understanding the inventory or customer-service consequences of a transportation disruption before those consequences become visible elsewhere in the business.
This evolution also puts renewed emphasis on data. Transportation touches carriers, brokers, warehouses, suppliers, customers, telematics platforms, visibility networks, ERP applications, order-management systems, and appointment-scheduling tools. Intelligent transportation management depends on those connections becoming both deeper and more reliable. An AI system cannot intelligently resolve a failed tender if the underlying carrier, lane, cost, capacity, and service data is incomplete.
This is also where Descartes becomes particularly relevant to the broader market conversation. Its footprint spans transportation management, routing, visibility, compliance, connectivity, and logistics execution. The strategic question is no longer whether an individual platform contains a particular feature, but whether it can help coordinate decisions across a more connected transportation ecosystem.
That shift is changing how transportation technology should be evaluated. The market is increasingly overlapping with visibility, autonomous exception management, decision intelligence, carrier connectivity, analytics, and broader supply chain orchestration. Customers do not experience disruptions in neatly separated software categories. A missed pickup can become a warehouse problem. A delayed inbound shipment can become an inventory problem. A carrier rejection can become a customer-service problem.
That is why the executive panel at the Descartes Innovation Forum should be especially useful. A shipper, a broker, and a logistics provider may use similar data and technology, but they operate under different economics and constraints. Those differences should make the discussion more valuable than a conventional technology panel.
The next generation of transportation management will not be defined simply by who has the broadest feature set. It will be defined by how quickly a platform can understand what is happening across the network, identify what matters, and help the organization act. That is the transition I will be looking to explore at the Descartes Innovation Forum in Chicago.
The post Descartes Innovation Forum: Transportation Management Is Moving From Execution to Intelligent Orchestration appeared first on Logistics Viewpoints.
You may like
Non classé
Loftware Acquires Seagull Software from Peak Rock Capital
Published
4 heures agoon
16 novembre 2026By
Loftware, a provider of product identification and labeling solutions, has acquired Seagull Software from an affiliate of Peak Rock Capital. The transaction brings together two companies focused on enterprise labeling, product identification, and supply chain traceability.
Seagull Software, headquartered in Redmond, Washington, provides labeling and item-level tracking solutions through its flagship BarTender platform. The software enables organizations to design, manage, print, and automate labels, barcodes, RFID tags, and other product identifiers used throughout manufacturing, distribution, and logistics operations.
Seagull serves thousands of customers across 160 countries through a global network of channel partners. Its technology supports the production of billions of labels and identifiers used for inventory management, regulatory compliance, product tracking, and supply chain execution.
Growth Under Peak Rock Ownership
Peak Rock acquired Seagull from its founders in 2022 and subsequently supported an expansion of the company’s product portfolio, sales organization, and recurring revenue business model.
During Peak Rock’s four-year ownership period, Seagull tripled its annual recurring revenue. The company also expanded its capabilities in supply chain traceability and invested in research and development, customer success, and international sales operations.
Product investments included AI-enabled label design and inventory analytics capabilities, extending Seagull’s offerings beyond traditional label creation and printing.
Jared Mason, Managing Director of Peak Rock, said the company had successfully transitioned toward a recurring revenue model while expanding its global sales organization and introducing additional AI capabilities.
Expanding Product Identification and Traceability
The acquisition places Seagull within Loftware’s product identification portfolio. Loftware is backed by private equity firms Accel-KKR and RS2 Healthcare Partners, formerly Riverside Partners.
Seagull’s BarTender platform supports organizations seeking to standardize labeling processes, automate identification workflows, and improve product traceability across distributed operations.
Jeff Hart, Chief Executive Officer of Seagull, credited Peak Rock with providing the resources to accelerate growth and expand the company’s ability to serve customers.
The transaction represents Peak Rock’s fourth recent sale from its software investment portfolio. According to the firm, it has now exited all software investments made before opening its fourth fund in 2025.
Financial terms of the transaction were not disclosed.
Raymond James and William Blair & Company served as financial advisors, while Kirkland & Ellis LLP provided legal counsel to Seagull.
The post Loftware Acquires Seagull Software from Peak Rock Capital appeared first on Logistics Viewpoints.
Heading into 2027, shifting carrier alliances, capacity returning to the Red Sea, and frequent rate and surcharge fluctuations make structured rate management essential to protecting your margins.
Join Judah Levine (Head of Research) for an exclusive breakdown of where ocean markets are heading next, followed by a live look at how forwarders use Rate & Quote Ocean to view non-digitized carrier contracts clearly, compare multiple carriers side-by-side, and eliminate costly invoice discrepancies.
What we’ll cover:
2027 Ocean Market Outlook: Key rate drivers, capacity shifts, and spot volatility trends with Judah Levine.
Digitized Contract Clarity: View non-digitized carrier agreements, 10-tab spreadsheets, and unmarked PDFs in a single, searchable digital format without folder-digging.
Multi-Carrier & Spot Comparisons: Compare contracted rates across multiple carriers side-by-side alongside live terminal and dynamic spot data on one screen.
Exclusive Live Attendee Offer: Unlock the chance to grab a quick 15 minutes with our team to see how your own carrier spreadsheets and tariffs look digitized inside the platform.
Can’t attend live? Register anyway and we’ll send the recording straight to your inbox.
The post 2027 Ocean Market Outlook appeared first on Freightos.
Non classé
From Material Flow to Machine Judgment: How Physical AI Connects Production Logistics to Autonomous Operations
Published
11 heures agoon
16 novembre 2026By
From Material Flow to Machine Judgment: How Physical AI Connects Production Logistics to Autonomous Operations
Walk any modern plant floor and you’ll see two different worlds. On one side are the production assets: CNC cells, assembly lines, test stations and packaging lines. Each one is heavily instrumented and tuned to the second. On the other side is everything that moves material between them: tuggers, forklifts, AMRs, conveyors, kitting stations and line-side supermarkets.
For decades these two worlds have been planned separately and run separately. They’ve been joined by a fragile layer of schedules, kanban cards, radio calls and heroic shift supervisors. The result is familiar. A line starves because a kit arrived 12 minutes late. A buffer overflows because upstream ran ahead of plan. A changeover stalls because the right fixtures are still on the far side of the building.
Here is the central argument of this column: manufacturers won’t reach true autonomous operations by automating the machines alone. They’ll get there when production logistics becomes as intelligent, perceptive and adaptive as the production process it feeds. Physical AI is the technology that finally makes that possible.
What We Mean by “Physical AI”
Most of the AI conversation over the past few years has been about language: copilots, chatbots and document summarization. Physical AI is different. It’s AI that perceives, reasons about and acts in the physical world. It combines four layers:
Perception: vision, LiDAR, force-torque and other sensors that let machines understand a changing, unstructured environment.
World models and simulation: physics-based digital twins where robots and material flows are trained and tested virtually before they touch the real floor.
Embodied decision-making: models that turn perception into motion, such as a path, a grasp or a hand-off, in milliseconds and at the edge.
Fleet-level orchestration: coordination across many heterogeneous agents (mobile robots, arms, conveyors and humans) toward one production goal.
Traditional automation does exactly what it was programmed to do. Physical AI handles what it wasn’t programmed for: the misplaced pallet, the deformed tote, the operator stepping into an aisle, the rush order that rewrites the afternoon.
The Missing Link: Why Logistics Is the Bottleneck to Autonomy
Manufacturers have spent heavily on making individual production assets smarter through predictive maintenance, closed-loop quality and adaptive process control. But a smart machine waiting for material is still an idle machine. Three failure patterns keep intralogistics from supporting autonomous operations.
1. The Schedule-Reality Gap
MES and ERP systems plan material movement against an idealized schedule, and the floor never matches that schedule. Fixed-route AGVs and milk runs can’t re-plan when a line speeds up, slows down or switches products. Each deviation travels downstream as either starvation or congestion.
2. The Perception Blind Spot
Most material handling still “sees” the plant through barcodes and RFID checkpoints. Between scans, the system doesn’t know where inventory really is or what condition it’s in. Autonomy can’t exist on top of partial situational awareness.
3. The Islands of Automation Problem
A plant may run AMRs from one vendor, AGVs from another, robotic palletizers from a third and a homegrown conveyor control system. Each is optimized locally, and none negotiates with the others. Local efficiency becomes system-level friction.
Until these gaps close, “lights-out” or “autonomous” manufacturing stays a slide in a strategy deck and never becomes an operating reality.
How Physical AI Closes the Loop
Physical AI connects production logistics to autonomous operations through four capabilities that build on each other.
1. Perception-Driven Material Awareness
Vision-equipped mobile robots, overhead cameras and smart sensors continuously map where material is, not where the system thinks it is. Inventory turns into a live spatial data stream instead of a series of transaction records. A shortage at line-side is detected when it starts to form, not when the line stops.
2. Simulation-Trained, Edge-Executed Intelligence
Robots and flow logic are trained in physics-accurate digital twins of the facility, covering layouts, traffic patterns, product mix and the edge cases that would be dangerous or expensive to test live. The resulting models are deployed to the edge, where they make path, grasp and hand-off decisions locally without waiting on a distant cloud. As Week 12 argued, that latency matters: a robot that has to ask permission for every move isn’t autonomous.
3. Demand-Sensing Material Flow
This is where logistics and production merge. When the production system signals a change, such as a faster takt, a quality hold or an unplanned changeover, the material flow responds on its own. Kits are re-sequenced, AMRs are re-tasked and buffers are rebalanced. Replenishment stops being a scheduled event and becomes a continuous, demand-sensing reflex.
4. Multi-Agent Orchestration Across the Value Stream
The end state isn’t one smart robot. It’s a coordinated fleet in which mobile robots, manipulators, conveyors, automated storage and people work as one system. Open interoperability standards such as VDA 5050 for mobile robot fleets, along with vendor-neutral orchestration layers, let mixed fleets negotiate priorities, resolve traffic conflicts and share tasks. Production logistics becomes an active participant in running the plant, not a support function.
A Day in the Autonomous Plant
Picture a discrete manufacturer running a mixed-model assembly line:
06:40. An inline vision system flags a supplier defect on a component batch, and the quality agent places the batch on hold.
06:41. The orchestration layer re-sequences production to models that don’t use the affected component. Within seconds, the material flow agents re-plan kitting: AMRs pull alternate kits from storage, and a robotic cell re-picks sub-assemblies for the new sequence.
06:45. A changeover begins on Line 2. Fixtures and tooling are already staged, because the logistics fleet saw the sequence change and pre-positioned them.
06:52. A supervisor gets one consolidated notification with the root cause, the actions taken and a recommended supplier escalation, and approves the escalation.
No line stopped. Nobody ran across the building with a clipboard. The decisions that needed human judgment (the supplier escalation) went to a human. The decisions that needed speed (re-routing, re-kitting, re-staging) were made by machines.
That’s autonomous operations: not the absence of people, but the absence of avoidable friction between production and the material that feeds it.
Autonomy With Guardrails: Safety Comes Before Speed
Autonomy isn’t the same as abdication. Physical AI puts moving mass, tooling and people in the same space, and the safety stakes are far higher than for a chatbot answering a question. Manufacturers getting this right follow a few clear principles.
Bounded autonomy. AI agents work inside hard-coded safety envelopes. Learning systems optimize within constraints and never override deterministic safety functions such as safety-rated controllers, light curtains and certified speed and separation monitoring.
Hierarchical control. Adaptive, learning layers stay architecturally separate from safety-critical control. The AI proposes, and certified systems enforce.
Human-in-the-loop by design. High-consequence decisions, such as quality dispositions, supplier actions and process parameter changes outside validated windows, go to people with clear context and fast override paths.
Validated before deployed. Simulation is a test bench as well as a training ground. Every model update is checked against the digital twin before it reaches the floor, and changes are documented as rigorously as any other engineering change.
Workforce readiness. Operators, technicians and contractors need real literacy in how these systems behave, where they fail and how to step in. Regulators increasingly expect it.
The organizations that scale Physical AI fastest won’t be the ones that grant the most autonomy. They’ll be the ones whose operators trust the autonomy, because it’s predictable, observable and bounded.
The Strategic Takeaway: Treat Logistics as a Production System
If you’re a plant leader, operations executive or digital transformation owner building a multi-year roadmap, three shifts matter most.
Stop funding logistics automation and production automation as separate programs. Put both under one operating model, one data architecture and one orchestration strategy. The value is in the connections between them.
Invest in the perception and simulation foundation first. Live spatial awareness and a trustworthy digital twin are the prerequisites for every autonomous capability above them. Without them, Physical AI is guessing.
Demand openness from your vendors. Require interoperability standards, edge-capable execution and open APIs. Any robot or system that can’t negotiate with the rest of your fleet will become tomorrow’s island of automation.
The factory of the future won’t be defined by its fastest machine. It will be defined by how well every asset, whether it makes things or moves them, perceives, decides and acts as one system.
The timing is fitting. Rockwell Automation’s Automation Fair is happening November 16-19, in Boston, and production logistics is a featured track there. On Wednesday, November 18, from 11:30am to 3:30pm ET, the event hosts its Production Logistics Summit. The summit opens with a keynote on “Production Logistics: The Next Era of Manufacturing Performance” and includes a customer fireside chat, breakout sessions on bridging disconnected systems and moving from pilot to enterprise-wide autonomy, and a closing panel on the journey to end-to-end autonomous operations.
Join the Conversation
Where does your plant lose the most time today: inside the production process, or in the handoffs that feed it? Is your material flow reacting to production, or still running on yesterday’s schedule? Let’s talk about it in a briefing.
Engage with ARC Advisory Group
Schedule a Briefing. Are you a technology provider bringing Physical AI, mobile robotics or orchestration solutions to manufacturing? Share your roadmap and case studies with our analyst team to be featured in future market maps and columns. Request an executive briefing from Lucas Martin.
The post From Material Flow to Machine Judgment: How Physical AI Connects Production Logistics to Autonomous Operations appeared first on Logistics Viewpoints.
Loftware Acquires Seagull Software from Peak Rock Capital
2027 Ocean Market Outlook
From Material Flow to Machine Judgment: How Physical AI Connects Production Logistics to Autonomous Operations
Freightos Global Freight Outlook – September 2026
Container rates jump another $1k/FEU – but is demand peaking? – July 8, 2026 Update
Walmart and the New Supply Chain Reality: AI, Automation, and Resilience
Trending
- Non classé3 mois ago
Freightos Global Freight Outlook – September 2026
- Non classé4 mois ago
Container rates jump another $1k/FEU – but is demand peaking? – July 8, 2026 Update
-
Non classé2 ans agoWalmart and the New Supply Chain Reality: AI, Automation, and Resilience
-
Non classé7 mois agoWhy Sulfuric Acid Is Emerging as a Supply Chain Constraint in Copper
- Non classé6 mois ago
Container rates starting to spike on peak season rush – June 2, 2026 Update
- Non classé1 an ago
13 Books Logistics And Supply Chain Experts Need To Read
- Non classé1 an ago
Ex-Asia ocean rates climb on GRIs, despite slowing demand – October 22, 2025 Update
- Non classé4 mois ago
LCL Shipping Cost Calculator: Calculate Air and Sea Shipping Freight Rates
